User Manual of FRT-415N
86
5.6.4 ACL
5.6.4.1 ACL
Choose
Service
>
ACL
and the page shown in the following figure appears. On this page, you can permit the
data packets from LAN or WAN to access the router. You can configure the IP address for Access Control List
(ACL). If ACL is enabled, only the effective IP address in the ACL can access the router.
If you select
Enable
in ACL capability, ensure that your host IP address is in ACL list
before it takes effect.
Figure 5-64
ACL
The following table describes the parameters:
Field
Description
Direction Select
Select the router interface. You can select
LAN
or
WAN
. In this
example,
LAN
is selected.
LAN ACL Switch
Select it to enable or disable ACL function.
IP Address
Enter the IP address of the specified interface. Only the IP address that
is in the same network segment with the IP address of the specified
interface can access the router.
Содержание FRT-415N
