
User’s Manual of FGSW-1816HPS
11
1.4 Product Features
Physical Port
16-port 10/100Base-TX
RJ45 copper with PoE in-line supported
2-port 10/100/1000Base-T
RJ45 copper
2 1000Base-X mini-GBIC/SFP
slots to share with Port-17 to Port-18
Reset button for system management
Power over Ethernet
Complies with IEEE 802.3at High Power over Ethernet End-Span PSE
Complies with IEEE 802.3af Power over Ethernet End-Span PSE
Up to 16 IEEE 802.3at / 802.3af devices powered
Supports PoE Power up to 30.8 watts for each PoE port
Detects powered device (PD) automatically
Circuit protection prevents power interference between ports
Remote power feeding up to 100m
PoE Power Usage (50/100/150/190 watts)
PoE
Management
Per port PoE function enable/disable
PoE Port Power feeding priority
Per PoE port power limit
PD
classification detection
PoE Power sequential
PoE
schedule
Layer 2 Features
Auto-MDI/MDI-X detection on each RJ45 port
Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
Supports broadcast storm control
Supports
VLAN
:
-
IEEE 802.1Q tag-based VLAN, up to 3
2
VLANs groups, out of 4095 VLAN IDs
-
Port-based VLAN, up to 16 VLAN groups
-
MTU VLAN (Multi-tenant Unit VLAN)
Supports
Link Aggregation
- 802.3ad
Link
Aggregation
Control Protocol (LACP)
- Cisco ether-channel (Static Trunk)
Supports
Spanning Tree Protocol
-
STP, IEEE 802.1d Spanning Tree Protocol
-
RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
Port mirroring to monitor the incoming or outgoing traffic on a particular port
Provides port mirror (Many-to-1)
Loopback protection to avoid broadcast loops
Quality of Service
2 priority queues on all switch ports
Traffic
classification
- Port-based
priority
-
IEEE 802.1p-based priority
-
IP TOS / DSCP-based priority