Planer PZD2410 Скачать руководство пользователя страница 5

3

 | FOR YOUR SAFETY

Before operating the monitor, please read this manual thoroughly. This manual should be 
retained for future reference. 

FCC Class B Radio Frequency Interference Statement 
WARNING: (FOR FCC CERTIFIED MODELS) 

NOTE: 

This equipment has been tested and found to comply with the limits for a Class B 

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy, and if not installed 
and used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or more of the following measures: 
1.  Reorient or relocate the receiving antenna. 
2.  Increase the separation between the equipment and receiver. 
3.  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 

4.  Consult the dealer or an experienced radio/TV technician for help. 

NOTICE: 

1.  The changes or modifications not expressly approved by the party responsible for 

compliance could void the user's authority to operate the equipment. 

2.  Shielded interface cables and AC power cord, if any, must be used in order to comply with 

the emission limits. 

3.  The manufacturer is not responsible for any radio or TV interference caused by 

unauthorized modification to this equipment. It is the responsibilities of the user to 
correct such interference. 

WARNING: 

To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously 
high voltages are present inside the monitor. Do not open the cabinet. Refer servicing to 
qualified personnel only. 
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may cause undesired 
operation.

Содержание PZD2410

































Отзывы: