Planer PZD2410, Руководство пользователя

Страница: 12 / 32

10
CONTROLS AND CONNECTORS
POWER CORD
Power Source:
1. Make sure that the power cord is the correct type required in your area.
2. This monitor has an internal universal power supply that allows operation in either
100/120V AC or 220/240V AC voltage area (No user adjustment is required.)
3. Connect the AC-power cord into the monitor’s power input socket. The AC-power cord
may be connected to either a wall power outlet or the power outlet socket on your PC,
depending on the type of power cord supplied with your monitor.
SIGNAL CABLE
Connecting the Signal Cable :
Plug one end of the signal cable to the LCD monitor and the
other end to a computer or a video source (Type C, HDMI or DP).
Caution:
If the AC outlet is not grounded (with three holes), install the proper grounding adapter
(not supplied).
HDMI
DP
TYPE C DP OUT
Figure 2 Connecting Cables
1. Power Cable 6. USB Type A cable
2. HDMI Cable 7. Lan Cable
3. DP Cable 8. DP Cable
4. Type-C Cable 9. Headphone Cable
5. USB Type A cable
Ethernet Connection
Connecting the Lan Cable: Connect one end of your Lan (RJ45) cable to the Lan (RJ45) port
of the monitor. USB Type-C cable must be connected.