Planar Wallnet, Настройка и эксплуатация

Страница: 56 / 88

Status Views
50
Status Views
Note: You need View authority to do anything here.
Start WallNet in a web browser and select Status
Views in the menu area. There are three types of
status reports: Brief, Full or Full and Memory. Note
that Full Status and Memory (available only for
displays with the memory slot feature) will take a
significant amount of time to download if many
of the memory slots are used.
1 Click Brief Status or Unit Status .
2 Choose a single ID in the dropdown list to
the right of
Get status for: This list has all
the IDs assigned to (and connected to) this
WallNet. If you think some are missing, add
them in Display Control > RS232 Setup.
3 Click Get status for: After a few moments,
the browser displays the report for that
display.
4 Look at the first few times. If there is no
status information shown, then WallNet is
not connected to that display or that display
has no AC power.
From the return information, you can learn some
basic facts. If all of the following are true, you can
be reasonably certain that the display is showing
the picture from the selected source:
• Display power or at least one lamp is on
• Mode is settled on something reasonable, not
Searching or Source Absent
• Displayed Pattern is None (no test pattern is
being displayed)
• If the Menu or MIP Displayed is No, the source
picture is not partly covered with a menu