Planar Dome C3i, Справочное руководство

Страница: 30 / 43

QUICK LINKS
Contents
Index
Regulatory Compliance
Product Information
Warranty
GETTING STARTED
About the Display
Package Contents
Identify Components
Position Display
Desk Stand Features
INSTALLING THE DISPLAY
Set DIP Switch
Install Display Controller
Connect Video and Power
Install Display Driver
Change Display Properties
Dome CXtra Software
APPENDIXES
Troubleshooting
Specifications
LED Status Lights
Single Desktop
USB Connection
Component Removal
Power Management
Palette Options
22
Dome C3i Display
To change the configuration to single desktop
If you are working on a dual-headed display, you can use the following procedure
to change your hardware and software configuration to single desktop.
1
Use the InstallShield Wizard to uninstall the existing driver (dx.5.1.0.003
release and higher). See “To uninstall the driver” on page 25 .
2
On the DIP switch, place switch 3 in the ON position. (See page 7 .)
3
Reinstall the DX2 display controller. (See page 8 .) Then attach both displays to
the controller. (See page 9 .)
4
Power on the system, and run Setup.exe to install the driver. (See page 10 .)
5
Set the display resolution. (See page 11 ).
On the Dome tab, select resolution
3072 x 2048 or 4096 x 1536 for
the single desktop
Safety precaution
Wear an antistatic wrist strap when
handling the board and display to
prevent electrostatic discharge.