51
SAVE THESE INSTRUCTIONS.
The manufacturer and distributor are not responsible for any damaged injury on
the event of failure to comply with these
2. Climatic classes
Look at chap. T
ECHNICAL
D
ATA
for information about the climatic class of your
appliance. Your appliance can be operated in rooms with relevant room
temperatures as named below.
CLIMATIC CLASS
AMBIENT TEMPERATURE
SN
+10
0
→
+32
0
C
e.g. unheated cellar
N
+16
0
→
+32
0
C
inner home temperature
ST
+16
0
→
+38
0
C
inner home temperature
T
+16
0
→
+43
0
C
inner home temperature
3. Installation guide
3.1 Installation site
1.
Unpack the appliance carefully. Dispose of the packaging as described in chapter waste
management.
2.
The accessories of your appliance can be protected from damage due to transportation
(adhesive tapes etc.). Remove such tapes very carefully. Remove remains of such tapes
with a damp cloth using lukewarm water and a mild detergent (see also chapter
CLEANING
AND MAINTENANCE
). Never remove any components of the back of the appliance!
3.
Install the appliance in a suitable position with an adequate distance from sources of heat
and cold.
4.
Check that the appliance and the power cord are not damaged.
5.
Install the appliance in a dry and well-ventilated place.
6.
Protect the appliance from direct sunlight.
7.
The doors must open completely and without hindrance.
8.
Install the appliance on a
level, dry and solid floor. Check the correct installation with a
bubble level.
9.
Connect the appliance to the mains properly.
10.
The nameplate is situated inside the appliance or at the back.
