73
E
RROR
C
AUSES
M
EASURES
C
OOKWARE DOES NOT BECOME HOT AND THE RELEVANT SYMBOL IS
DISPLAYED
.
➢
Cookware cannot be detected,
because it is unsuitable, too small or
improperly positioned on the
cooking zone.
➢
Use suitable cookware which meets
the diameter of the cooking zone.
Place cookware on the centre of the
cooking zone.
T
HE APPLIANCE OR A COOKING ZONE HAS BEEN SWITCHED OFF
AUTOMATICALLY AND UNEXPECTEDLY
,
AN ACOUSTIC SIGNAL SOUNDS AND AN
ERROR CODE IS DISPLAYED
6
(
TYPICALLY ALTERNATING WITH ONE OR TWO
DIGITS ON THE TIMER
-
DISPLAY
).
➢
Technical malfunction.
➢
Note the complete error-code,
disconnect the appliance from the
mains and contact the shop you
purchased the appliance at
If the appliance shows a malfunction not noted on the schedule above or if you have
checked all items on the above schedule but the problem still exists, please contact
the shop you purchased the appliance at.
7.
Error Code
If an abnormality comes up, the hob will enter the protective state automatically
and display corresponding protective codes.
Problem
Possible causes
What to do
E1
Signal lost (PCB failure)
Please contact after sales
service.
E2/E3
Abnormal high/Low
input voltage
Stop cooking and wait
until input voltage back
to normal. If not please
contact service center.
E4/E5/E6
Thermistor failure.
Please contact service
center to repair.
6
depending on model
