~ 63 ~
If you have to move the appliance, set the adjustable feet to minimum position
so the appliance can be moved on its rollers
23
easily. Readjust the appliance when
transport has been completed.
NOTICE!
The rollers (
depending on model
) are no castors and intended
to move the appliance forward and backwards only. Lateral movements
can damage your floor and the rollers.
4. Operation
WARNING!
To disconnect the appliance from the mains, you must
unplug the appliance or use a cut-off device.
4.1 Before initial operation
WARNING!
While unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept away from children and
pets. CHOKING HAZARD! RISK OF INJURY!
NOTICE!
Leave the appliance in an upright position for
at least 4 - 6 hours
before you connect it to the mains to ensure, that the oil has flowed back
into the compressor.
NOTICE!
If you use the appliance for the first time or the appliance has
been disconnected from the mains for a longer period of time, allow the
appliance to cool down for 3 until 4 hours at following temperature setting
before
you place any fresh or frozen food in the appliance: fridge mode,
cooling level 2 / freezer mode, cooling level 3 (s. chapter 4.6 T
EMPERATURE
SETTING
et seq.). If you place food in the appliance before it has reached
its normal operating temperature, the food can thaw and / or spoil.
1.
Remove all packaging materials.
2.
Adjust the feet and clean the appliance (see chapter
CLEANING AND
MAINTENANCE
).
3.
Do not start the appliance immediately after installation. Wait at least 4 - 6 hours
to ensure proper operation.
4.
Connect the appliance to the mains properly.
5.
The temperature setting (setting of the cooling or freezing level) of the appliance
can be adjusted manually by pressing the relevant button until the desired cooling
or freezing level will be indicated (s. chapter 4.6 T
EMPERATURE SETTING
et seq.).
23
Depending on model.
