~
103
~
WARNING!
Never use any mechanical items, knives or other sharp-
edged objects to remove the encrusted ice. Never use a steam cleaner.
RISK OF ELECTRICAL SHOCK!
WARNING!
Do not use hairdryers, electrical heaters or other technical
devices to accelerate the defrosting-progress. RISK OF ELECTRICAL
SHOCK!
1.
Remove the contents from the freezing-compartment and put them into a cooling
box.
2.
Place a container in front of the appliance to catch the water.
3.
When the encrusted ice melts put some dry cloths into the freezer-compartment
to hold the water back.
4.
Do not
use hot water to accelerate the defrosting operation.
5.
Remove the big pieces of ice first.
6.
Afterwards remove the small pieces of ice.
7.
Wipe and dry the appliance and door seals with dry and soft cloths.
8.
After cleaning leave the door open for some time to ventilate the appliance.
6.2 Cleaning of the water dispenser
WARNING!
Remove all overflowed or spilled water from the appliance
or the floor. RISK OF SLIPPING! RISK OF ELECTRIC SHOCK!
❖
Empty the water tank
before
you remove it.
❖
Clean all parts of the water tank and the dispenser using hot soapy water before
you use the dispenser for the first time.
❖
You have to remove the water tank for cleaning.
H
OW TO REMOVE THE WATER TANK
1.
Hold both sides of the water tank (
A
)
tightly; then lift and remove it from the
door at an angle of 45
0
carefully. Ensure
that the water valve (
B
) at the bottom
31
of the water tank has been pulled out of
the opening in the door (
D
/ s. fig. below,
step b) completely.
31
Depending on model.
