~ 78 ~
« O
N
/
O
FF
» -
SENSOR
and
DIGITAL DISPLAY
➢
Sensor to switch on / off the extractor hood.
➢
This sensor is also a digital display and indicates the currently set
power level (motor speed) of the extractor hood.
« I
NCREASE
» -
SENSOR
➢
Sensor to increase the power level (motor speed).
« I
LLUMINATION
» -
SENSOR
➢
Sensor to switch on / off the standard illumination.
4.2 Operation
« O
N
/
O
FF
» -
SENSOR AND DIGITAL DISPLAY
« O
N
/
O
FF
» -
SENSOR
❖
Use the « O
N
/ O
FF
» -
SENSOR
to switch on / off the extractor hood (
STANDBY
MODE
).
1.
Touch the « O
N
/ O
FF
» -
SENSOR
to switch on the extractor hood.
2.
The indicators of the sensors « D
ECORATIVE ILLUMINATION
»,
« D
ECREASE
»,
« I
NCREASE
»
und
« I
LLUMINATION
»
go on.
3.
The digital display indicates the current power level (motor speed): «
0
».
4.
The extractor hood now is in
OPERATION MODE
.
After the extractor hood switched on using the « O
N
/ O
FF
» -
SENSOR
, it is
always in
OPERATION MODE
. The motor is switched off and the digital display
indicates «
0
».
If no sensor is touched
within
2 minutes after the appliance is switched on, the
DIGITAL DISPLAY
and the indicators of the sensors « D
ECORATIVE
ILLUMINATION
»,
« D
ECREASE
»,
« I
NCREASE
»
und
« I
LLUMINATION
»
go
off
.
5.
Touch the «
I
NCREASE
» -
SENSOR
repeatedly
to set the desired power level of
the extractor hood (power level 1 - 3).
6.
The set power level can be changed
at any time
using the sensors « D
ECREASE
»
and / or
« I
NCREASE
».
The indicator of the sensor you are
currently
using lights up. The indicators of
the sensors that are not in use are in backlight mode.
