119
Phenomenon
Cases not involving a machine defect
Reference
page
No pictures are
displayed.
(continued)
"Waiting for connection." remains displayed even
though the USB TYPE B port is selected.
Remove the USB cable and reconnect after a while.
11, 12
The projector does not recognize the USB storage
device inserted into USB TYPE A port.
Before removing the USB storage device, be sure to use the
REMOVE USB function on the thumbnail screen, which appears
when the
USB TYPE A
port is selected as the input source.
12, 92
Video screen
display freezes.
The FREEZE function is working.
Press
FREEZE
button to restore the screen to normal.
33
Colors have a
faded- out
appearance, or
Color tone is
poor.
Color settings are not correctly adjusted.
Perform picture adjustments by changing the COLOR
TEMP, COLOR, TINT and/or COLOR SPACE settings,
using the menu functions.
39, 44
COLOR SPACE setting is not suitable.
Change the COLOR SPACE setting to AUTO, RGB,
SMPTE240, REC709 or REC601.
44
Pictures
appear dark.
The brightness and/or contrast are adjusted to an
extremely low level.
Adjust BRIGHTNESS and/or CONTRAST settings to a
higher level using the menu function.
38
The projector is operating in Eco mode.
Set ECO MODE to NORMAL, and set AUTO ECO
MODE to OFF, in the SETUP menu.
49
The lamp is approaching the end of its product lifetime.
Replace the lamp.
107, 108
Pictures
appear blurry.
Either the focus and/or horizontal phase settings are
not properly adjusted.
Adjust the focus using the focus ring, and/or H PHASE
using the menu function.
27, 43
The lens is dirty or misty.
Clean the lens referring to the section
Caring for the lens
.
111
(continued on next page)
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continued)
