PJLink CP-WX3011N Скачать руководство пользователя

Страница: 95 / 100

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects

About the phenomenon confused with a machine defect, check and cope with it

according to the following table.

Phenomenon

Cases not involving a machine defect

Reference

page

Power does not

come on.

The electrical power cord is not plugged in.

Correctly connect the power cord.

The main power source has been interrupted during

operation such as by a power outage (blackout), etc.

Please disconnect the power plug from the power outlet,

and allow the projector to cool down at least 10 minutes,

then turn the power on again.

12, 17

Either there is no lamp and/or lamp cover, or either

of these has not been properly fixed.

Please turn the power off and disconnect the power

plug from the power outlet, and allow the projector to

cool down at least 45 minutes. After the projector has

sufficiently cooled down, please make confirmation of

the attachment state of the lamp and lamp cover, and

then turn the power on again.

Neither sounds

nor pictures are

outputted.

The signal cables are not correctly connected.

Correctly connect the connection cables.

Signal source does not correctly work.

Correctly set up the signal source device by referring to

the manual of the source device.

–

The input changeover settings are mismatched.

Select the input signal, and correct the settings.

The BLANK function for pictures and the MUTE

function for sounds are working.

AV MUTE may be active.

Refer to the item “Sound does not come out” and “No

pictures are displayed” on the next page to turn off the

MUTE and BLANK functions.

18, 25,

(Continued on next page)

Содержание CP-WX3011N





































































































Результаты поиска

Содержание CP-WX3011N

Отзывы:

Похожие инструкции для CP-WX3011N

Бренды по названию

Популярные бренды

PJLink CP-WX3011N, Руководство пользователя

Результаты поиска

Содержание CP-WX3011N

Отзывы:

Похожие инструкции для CP-WX3011N

Бренды по названию

Популярные бренды