Pixsys HMI series, Быстрый старт

Страница: 13 / 44

User manual - HMI Series - 13
11.a
WIN EXPLORER
From this window it is possible to choose a set of options to
start Windows CE and execute TDControlPanel.
• The first option starts Windows CE with desktop.
• The second option allows TDControlPanel starting if ,
during the switch on , the key “Stop” is keep pressed .
• Enabling the third option it is possible to set a
protection password to avoid that unauthorized users,
keeping pressed “STOP” , access TDControlPanel
settings..
“START WINDOWS DESKTOP” allows to start “Explorer.exe” to access Windows CE desktop.
11.b
HMI_MOVICON
From this window it is possible to select which Movicon 11
services/programs execute automatically at starting.
The functions of the Movicon scada are available in all
HMI and in “WEB” version PL500 (PL500-335-1AD-WEB)
“START” activates manually the Movicon project (and the file upload service)
11.c PLC LOGICLAB
From this window it is possible to enable/disable the
SoftPLC execution at starting. Selecting “RUN console
DEBUG” , during the SoftPLC execution, the Debug window
will be filled with real-time system events to verify possible
anomalies.
NB
: this function requires many device resources. It is
suggested to keep it active only if there are problems
during the software development. Disable this function at
the end of the development phase.
“START” activates manually the SoftPLC project (and any debug window).
11.d LAN ETH1
From this window it is possible to modify the device
network configuration parameters. Any modification will
require a restart to be applied.
NB
:
to transfer the SoftPLC program and Movicon on the
device, it must have a fixed address. It is not possible to
operate in DHCP
.
The HMI default IP address is 192.168.0.100
The PL500 default IP address is 192.168.0.99