22
No.
Name
Description
connected to the switcher successfully. You can
press the button to start for screen projection now.
3
Projection Button Press the button to project laptop’s screen on the display.
Note:
USB Dongle is sold separately.
Steps to share laptop’s screen on the display using USB dongle:
1. Pair USB Dongle with the switcher.
Connect USB Dongle to USB Type A of the switcher for pairing up. Then
the switcher will set its soft AP’s SSID and password for USB dongle.
Once pairing is done, “Pairing succeeded” will appear on the display
screen.
2. Connect USB Dongle to a laptop.
Connect USB Dongle to the laptop, it will start running and connecting to
the switcher’s soft AP. Once the Dongle connects to the switcher
successfully, the USB Dongle LED stops blinking and turns to be solid
on.
3. Now press the USB Dongle button, you can share your laptop’s screen
on the display screen immediately. Hold press the button for at least 5
seconds, you can have your laptop’s screen displayed in full screen.
Guide Screen
The switcher uses a Guide Screen to convey the basic connection
instructions for user access. The Guide Screen can be personalized to allow
custom connection instructions on the switcher’s Web UI page.
The Guide Screen is accessible in the following cases:
•
Automatic switching: disconnect all video sources from the switcher, the
Guide Screen will appear automatically.
•
Manual switching:
1) Short press the source selection button on front panel until no active
