6
Panel Description
Encoder
Front Panel
2
1
No. Name
Description
1
Power LED
On:
Encoder is powered on.
Off:
Encoder is powered off.
2
Status LED
On:
Encoder detects valid signal input.
Blinking:
Encoder detects no signal input.
Off:
Encoder is powered off or in the boot
process.
Rear Panel
7
6
5
4
3
2
1
No. Name
Description
1
DC 12V
Connect to the DC 12V power adapter.
2
Audio Out
Connect to an audio decoder such as an amplifier
for audio de-embedding output from HDMI
source.
3
HDMI In
Connect to an HDMI source device.
4
RS232
Connect this port to a RS232 device such as a
computer to bidirectionally communicate with a
RS232 device at the IP box or decoder side.
5
LAN (POE)
Connect to an Ethernet Switch for IP streaming
output and device control.
