3
PixController RF Controller Overview
This new controller works in conjunction with the X10 wireless motion sensors. The X10 wireless
motion sensors will transmit a wireless command signal to the PixController RF receiver controller
when a motion event is detected. Multiple X10 sensors can control one or more PixController RF
controllers from a "
Line of Sight
" distance of 100 feet or greater depending on the type of
receiving antenna used.
Basic Theory of Operation
1.
A target, such as an animal or person walks past the X10 wireless motion sensor
and triggers an event.
2.
Once the X10 wireless motion sensor is triggered it sends out a RF "On"
command.
3.
The RF PixController board is listening for X10 commands and picks up the RF
"On" command sent from the X10 wireless PIR sensor. It will decode the RF
commands House Code and Unit Code and make a decision on what to do.
4.
If the command send is to trigger the camcorder to start recording video
VideoEye™ Plus Field Setup
Copyright ©,
Pix
Controller, Inc.
http://www.pixcontroller.com
,
all rights reserved.
Pix
Controller, Inc.
2610 Haymaker Farm Road
Export, PA 15632
724-733-0970
