Piusi PW Mobile, Инструкция по установке и эксплуатации

Страница: 48 / 64

M0483
48
/64
Installation and use
OCIO 2.0 Remove the front cover and
connect the cable
RS 485 as shown in the pic-
ture.
PW Mobile power supply
must be provided separately
from that of OCIO.
11.5 LEDS DESCRIPTION
NAME COLOR STATUS DESCRIPTION
Green On, fast blinking
(250 mSec blink time)
Router is powered on (System is initializing)
On, blinking
(500 mSec blink time)
Router starts operating
Off Router is powered off
Green
Always off. SIM inserted correctly
On, blinking SIM inserted in the wrong slot
Green
On, blinking There is dataflow
On, solid Link connection is established
Off Link connection is not established
Green Three lights are solid green High signal strength (21-31) is available
Two lights are solid green Medium signal strength (11-20) is avail-
able
One light is solid green Low signal strength (1-10) is available
Off No signal
When the network is disconnected, those three signal LEDs are designed as a binary
combination code to indicate a series of error report.
Blinking: 1 Off: 0