Piusi PW Mobile, Инструкция по установке и эксплуатации

Страница: 37 / 64

37
/124 37
/64
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
translated from italian
PW Mobile
5 SAFETY INSTRUCTIONS
ELECTRIC MAINTENANCE CONTROL INTERVENTIONS
MAINS - PRELIMINARY CHECKS BEFORE INSTALLATION
ATTENTION YOU MUST AVOID ANY CONTACT BETWEEN THE ELECTRICAL POWER
SUPPLY AND THE FLUID THAT NEEDS TO BE USED.
BEFORE ANY CHECKS OR MAINTENANCE WORK ARE CARRIED OUT, DIS-
CONNECT THE POWER SOURCE.
FIRE AND
EXPLOSION
When flammable fluids are present in the work area, such as gasoline and
windshield wiper fluid, be aware that flammable fumes can ignite or ex-
plode. To help prevent fire and explosion:
The Device is not an anti-explosive type
The device must be installed outside areas at risk of explosion
Do not install in areas where flammable vapors may be present
• Use equipment only in will ventilated area;
• Keep work area free of debris, including rags and spilled or open contain-
ers of solvent and gasoline. ;
• Do not plug or unplug power cords or turn lights on or off when flammable
fumes are present;
• Ground all equipment in the work area;
• Stop operation immediately if static sparking occurs or if you feel a shock.
Do not use equipment until you identify and correct the problem;
• Keep a working fire extinguisher in the work area.