![PIU39 PLUSLITE PIXEL PL1940 Скачать руководство пользователя страница 39](http://html.mh-extra.com/html/piu39/pluslite-pixel-pl1940/pluslite-pixel-pl1940_user-manual_1560330039.webp)
39
7. Trouble shooting
Following are a few common problems that may occur during operation. Here are
some suggestions for easy troubleshooting:
A. The unit does not work, no light and the fan does not work
1. Check the connection of power and main fuse.
2. Measure the mains voltage on the main connector.
3. Check the power on LED.
B. Not responding to DMX controller
1. DMX LED should be on. If not, check DMX connectors, cables to see if link
property
2. If the DMX LED is on and no response to the channel, check the address
setting
and DMX polarity
3. If you have intermittent DMX signal problems, check the pins on connectors or
on
PCB of the unit or the preovious one.
4. Try to use another DMX controller.
5. Check if the DMX cables run near or run alongside to high voltage cables that
may cause damage or interference to DMX interface circuit
C. One of the channels is not working well
1. The stepper motor might be damaged or the cable connected to the PCB is
broken
2. The motor’s drive IC on
the PCB might be out of condition.
The cleaning of internal and external optical lenses and/or mirrors must be
carried out periodically to optimize light output. Cleaning frequency depends on
the environment in which the fixture operates: damp, smoky or particularly dirty
surrounding can cause greater accumulation of dirt on the unit’s optics.
- Clean with soft cloth using normal glass cleaning fluid.
- Always dry the parts carefully.
- Clean the external optics at least every 20 days. Clean the internal optics at
least every 30/60 days
.
8. Fixture Cleaning