Pittsburgh 95840 Скачать руководство пользователя страница 3

Page 3

SKU 95840-95841

for technical questions, please call 1-800-444-3353.

use only 1/2” (95841) or 3/8” (95840) sockets with the torque capability shown 
in the specifications chart on prior page.

  Otherwise, the socket could fly off the 

drive anvil or break apart, causing injury.

Keep your work area clean and well lit.  

Cluttered benches and dark areas invite 

accidents.

Keep children away while operating the Digital torque Wrench.  

Keep children 

out of the work area.

stay alert.  

Do not operate the Digital Torque Wrench while tired or under the influ-

ence of drugs, alcohol, or medication. 

Do not overload the Digital torque Wrench.  

Use the correct tool for your applica-

tion.  Do not use it for applications other than intended.

Maintain the torque Wrench with care.  

Do not use a damaged Torque Wrench.  

Tag a damaged Torque Wrench “Do not use” until repaired.

torque Wrench service must be performed only by qualified repair personnel. 

Service or maintenance performed by unqualified personnel could result in a risk 
of injury.

When servicing the torque Wrench, use only identical replacement parts.  

Fol-

low instructions in the “Inspection and Maintenance” section of this manual.  

use eye and ear protection.  

Always wear ANSI-approved impact safety goggles 

and hearing protection. 

Do not use cheater bars or hammers to force the torque Wrench.

Do not use the torque Wrench to break a fastener loose.

always pull a torque Wrench towards you.  

Pushing the Torque Wrench may 

force it past its maximum capacity and increase the risk of losing control, which 
may cause injury.

Maintain tools with care.  

Make certain that the Torque Wrench has a fresh bat-

tery.  Inspect the Torque Wrench periodically and, if damaged, have it repaired by 
an authorized technician.

Do not expose this product to rain or wet conditions.  

Water entering a Digital 

Torque Wrench will damage it.

Do not use the torque Wrench:

If the battery is low
Near any explosive gasses or fumes
If  any  abnormal  operation  is  detected  (if  in  doubt  about  the  condition  of  the 
Torque Wrench have it serviced)

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

a.
b.
c.

Содержание 95840








Отзывы: