Pittsburgh 68783 Скачать руководство пользователя страница 2

SKU 

68783

 

For technical questions, please call 

1-800-444-3353 

Page: 

1

Save This Manual

Keep this manual for the safety warnings and precautions, 

assembly, operating, inspection, maintenance and cleaning 

procedures.  Write the product’s serial number on the 

front page of the user’s manual (or month and year of 

purchase if product has no number).  Keep this manual and 

the receipt in a safe and dry place for future reference.

Important Safety Information

In this manual, on the labeling, and all other 

information provided with this product:

  This is the safety alert symbol.  It is used to 

alert you to potential personal injury hazards.  

Obey all safety messages that follow this 

symbol to avoid possible injury or death.

DANGER indicates a hazardous situation which, if 

not avoided, will result in death or serious injury.

WARNING indicates a hazardous situation which, if 

not avoided, could result in death or serious injury.

CAUTION, used with the safety alert symbol, 

indicates a hazardous situation which, if not avoided, 

could result in minor or moderate injury.

NOTICE is used to address practices 

not related to personal injury.

CAUTION, without the safety alert symbol, is used to 

address practices not related to personal injury.

Safety Warnings

  WARNING  

Read all safety warnings 

and instructions. Failure to heed 

these markings may result in personal 

injury and/or property damage.

1.  Study, understand, and follow all instructions 

before operating this device.  

2.  Do not exceed rated capacity (4,000 lb.). 
3.  Use only on hard, level surfaces. 
4.  Lifting device only. Immediately after lifting, 

support the vehicle with appropriate means. 

5.  Do not move or dolly the vehicle while on the jack. 
6.  Failure to heed these markings may result in 

personal injury and/or property damage.  

7.  Lift only areas of the vehicle as specified 

by the vehicle manufacturer. 

8.  No alterations shall be made to this product. 
9.  Never work on, under or around a load 

supported only by this device.

10. Do not adjust safety valve. 
11.  Wear ANSI-approved safety goggles and 

heavy-duty work gloves during use. 

12. Keep clear of load while lifting and lowering. 
13. Lower load slowly. 
14. Apply parking brake and chock 

tires before lifting vehicle. 

15. Inspect before every use; do not use 

if parts are loose or damaged. 

16. Do not use for aircraft purposes.
17. The warnings, precautions, and instructions 

discussed in this manual cannot cover all possible 

conditions and situations that may occur.  The 

operator must understand that common sense and 

caution are factors, which cannot be built into this 

product, but must be supplied by the operator.

18. The brass components of this product contain lead, 

a chemical known to the State of California to cause 

cancer, birth defects (or other reproductive harm). 

(California Health & Safety code § 25249.5, et seq.)

IMPORTANT!  Before first use:

Check hydraulic oil level and fill to 1/4" below the fill 

port as needed. Thoroughly test the Jack for proper 

operation.  If it does not work properly, bleed air 

from its hydraulic system as stated on page 2.

Содержание 68783









Отзывы: