background image

Page 2

For technical questions, please call 1-888-866-5797.

Item 61600

Specifications

Rated Capacity

4,000 lb.

Height Range

49-3/4" to 93-1/2"

IMPORTANT SAFETY INFORMATION

1.  Study, understand, and follow all 

instructions before operating this device.

2.  Do not exceed rated capacity.
3.  Use only on hard level surface.
4.  Do not use the stand to 

support a vehicle.

5.  Center load on saddle.
6.  Use stands in pairs to stabilize the 

vehicle before starting repairs.

7.  Failure to heed these markings 

may result in personal injury 

and/ or property damage.

8.  NO ALTERATIONS SHALL 

BE MADE TO THIS PRODUCT.

9.  Wear ANSI-approved safety goggles 

and heavy-duty work gloves 

during assembly and use.

10.  Use as intended only.  This Stand is 

designed to help prevent the tipping/

rocking of a vehicle while the vehicle 

is engaged on an automotive lift.

11.  Do not use for aircraft purposes.
12.  Inspect before every use;  

do not use if parts are 

loose or damaged.

13. 

Be aware of dynamic loading!

  

Sudden load movement may 

briefly create excess load 

causing product failure.

14.  Assemble only according to these 

instructions.  Improper assembly 

can create hazards.

15.  Keep assembly area clean and well lit.
16.  Keep bystanders out of the 

area during assembly.

17.  Do not assemble when tired 

or when under the influence of 

alcohol, drugs or medication.

18.  Weight capacity and other product 

capabilities apply to properly and 

completely assembled product only.

19.  Make sure the vehicle lift is 

rated to at least vehicle’s weight, 

in good working order, and securely 

locked into place before using stand.

20.  This product is not a toy.  Do not allow 

children to play with or near this item.

21.  Maintain product labels and 

nameplates.  These carry 

important safety information.  

If unreadable or missing, contact 

Harbor Freight Tools for a replacement.

Содержание 61600









Отзывы: