User Guide
59021 V0808
Страница 1: ...User Guide 59021 V0808...
Страница 2: ...in that hole Do the same on the other side of the plate The two axle bushings should be parallel This is where the front axle will go 2 From each side count 16 holes back from the front axle bushings...
Страница 3: ...the parts are not too tight 7 Push the pinion gear onto the motor shaft Snap the motor into the motor mount 8 Turn the motor so the pinion gear is on top of the drive gear and the motor is between th...
Страница 4: ...up place an adhesive tab on the two tabs that extend from the cutout Practice folding the cutout over the car so the tab on the wide end is aligned with the car s back and the tab on the narrow end i...
