Pitney Bowes SendPro, Руководство пользователя

Страница: 99 / 130

Printing a test pattern
Print a test pattern to see if the printhead is working properly or if you have enough ink in the cartridge.
1. Tap Settings on the toolbar.
2. Scroll down and tap Envelope Printing .
3. Tap Print Test Pattern .
4. Feed the envelope through the device when the message "Print a Test Pattern?" appears.
5. Examine the pattern printed on the envelope:
l
Tap Done if the lines are unbroken and match the "Good" test pattern shown on the display.
l
Tap Clean Printhead if the test pattern has missing or incomplete lines
n
Once the cleaning operation completes, you must print another test pattern.
n
If this new pattern still has broken or missing lines, you may need to replace the ink
cartridge or clean or replace the printhead.
n
If you see no improvement in print quality, do not repeat the cleaning, as cleaning the print
nozzles consumes ink.
Good Test Print
Bad Test Print
Cleaning the printhead
Clean the printhead nozzles if you get a bad quality test print pattern, to try to correct the problem.
10 • Maintenance
Pitney Bowes User Guide November 2020 99