Pitney Bowes EDGE 7.11, Справочное руководство

Страница: 110 / 896

PBX Setup Coded Project
Telephony Gateway Reference Manual 110
Coded Project
Coded Project maps the DNIS (Dialed Number Identification Service)
or VDN (Vector Directory Number) value for each incoming phone
line on the gateway to a corresponding EDGE project. The VDN can
be mapped for each defined vector on the gateway to a correspond-
ing EDGE project. A vector is a set of steps defined on the PBX that
determines what happens to calls (for example a vector can route a
call to an ACD or play a message for a caller).
When an incoming call is received, the DNIS or VDN is referenced
against the defined coded project selections and the agent is routed
to the associated project. A DNIS or VDN can be mapped to exactly
one project.
To select whether the DNIS, VDN, or both are used to map inbound
calls to projects, use the configuration command on the
Options tab.
The Select project based on property determines what is used to
map inbound calls. ( With the Davox Gateway, only the DNIS can be
used for project selection, not VDNs. )
Note: If you use coded project selection, it is important to map every
DNIS or VDN to an EDGE project.