1
2
3
4
5
6
FRONT PANEL
LED
Label
LED Color LED Behavior
g
Green
Steady ON:
The device is
powered on
OFF:
The device is
powered off
e
Green/
Yellow/Red
Static
Green:
PLC link Established
with speed is greater
or equal than
threshold 2
(100Mbps)
Static:
Yellow
PLC link Established
with speed is
between threshold 1
(80Mbps) and
threshold 2
(100Mbps)
Static:
Red
PLC link Established with speed is below or equal
threshold 1 (80Mbps)
OFF
No data received by an associated and
authenticated device on the PLC link
f
Green
Steady ON:
Ethernet Link is established and Ethernet activity
present (traffic in up/down direction)
OFF:
No Ethernet Link is established
REAR PANEL
PORTS DESCRIPTION
a
AC power plug
d
One Ethernet port 10/100 Mbps
BUTTONS DESCRIPTION
b
Reset to factory default
c
Security button (Authentication Button)
PACKAGE CONTENTS
Y
our new
Discus™ DEX P200H
kit contains the related hardware and
software.
In it you will find:
1.
Two
Discus™ DEX P200H
units
2.
Two Ethernet cables
3.
One installation CD-ROM (Pirelli Device Manager and QIG)
By purchasing your
Discus™ DEX P200H
, based on PLC technology
compliant with Homeplug AV standard, you have entered into the
word of Broadband Connectivity.
DEX P200H
Extenders, high
performance and cost effective external dongles, make the Customer
able to connect the Home Gateway to any Ethernet terminal (e.g. Set
Top Box), avoiding un-esthetical new cabling, wiring works and
technical on-site support.
This Quick Installation Guide is meant to help the User installing
Discus™ DEX P200H
and distributing Broadband Services (e.g. High
Definition Video Streaming) throughout Home Network, quickly and
easily.
1
Positioning the Extenders
You should preferably place the extenders in a position that:
•
is not exposed to high moisture and water dropping
•
is not exposed to direct sunlight and heat sources
•
is not too close to fluorescent lighting fixture and other sources
of electrical noise such as radio sets, transmitters and
amplifiers
NOTE:
Nominal performances cannot be guaranteed in presence of
fluorescent lighting fixture and Switching power supply interference !
2
System Requirements
Before starting you must ensure the following:
•
One avalable 10/100 Mbps Ethernet port
•
Windows 2000/XP operating system
NOTE:
Previous
requirements
are suggested for device configuration by
Pirelli Device Manager.
