Page 13 of 14
13.2 Cleaning the Vacuum Cleaner and Components
Do not clean the vacuum cleaner, components or accessories using
petrol or any other flammable liquid or solvents, etc.
Clean only the outside of the vacuum cleaner.
Use only a moist cloth and mild detergent for cleaning the vacuum
cleaner, components and accessories.
After cleaning, wipe off the moisture on vacuum cleaner, components
and accessories with a dry cloth.
Do Not
place accessories and components in a dishwasher.
14 Troubleshooting
Noisy operation
Empty and Wash the Dust Bag.
Wash the Filters
Suction Not Strong
Empty and Wash the Dust Bag.
Wash the Filters
Check for blockages and unblock
Over-heating / Stopping
Empty and Wash the Dust Bag.
Wash the Filters
Check for blockages and unblock then allow it to cool
Floor Brush hard to push
Due to the strong suction of your vacuum cleaner, it
may be difficult to push, especially over thick carpet.
Rather than force the Floor Brush, lift the Floor Brush
momentarily to allow air to flow into the vacuum
releasing the built up suction pressure, then continue
vacuuming.
Slide open the vacuum suction adjusting plate
(Sliding Block) located on the hose handle grip. This
will reduce suction to the floor head.