Sound settings
07
35
En
English
Français
Español
Chapter 7:
Sound settings
Using the Sound Retriever
When audio data is removed during the WMA/
MP3/MPEG-4 AAC compression process,
sound quality often suffers from an uneven
sound image. The Sound Retriever feature
employs new DSP technology that helps bring
CD quality sound back to compressed by
restoring sound pressure and smoothing
jagged artifacts left over after compression.
• Default setting: ON
1
Press S.RETRIEVER.
The newly set value displays for 5 seconds.
• Use
/
or
S.RETRIEVER
to set the Sound
Retriever to ON/OFF as desired.
Using the sound effects
You can add exciting effects to audio sources.
• Default setting: OFF
1
Press SOUND.
The newly set value displays for 5 seconds.
Vivid
1
– Produces a sharpened effect
similar to that experienced at a live
concert.
Lo-Fi (Low Fidelity)
– Produces a retro-
feel to music play.
ALC (Auto Level Control)
– This unit
equalizes playback sound levels.
OFF
–
Revert sound to its natural state.
• Use
/
or
SOUND
to switch Sound
modes.
Note
1 When
Bluetooth
AUDIO function is selected, ‘Vivid’ is not displayed.
XW-NAC3_CUZXTSM.book 35 ページ 2010年4月6日 火曜日 午後1時18分