XV-DV360
61
5
6
7
8
5
6
7
8
C
D
F
A
B
E
6.5 MECHANISM ADJUSTMENT
• Remove the 06SD Pickup Assy from the Traverse Mechanism Assy-S.
• Remove the joint and the joint spring of the 06SD Pickup Assy.
• Put the joint between the Tangential (or Radial) adjustment screw and the mechanism base
and turn each screw to adjust the height.
(Refer to "6.1 ADJUSTMENT ITEMS AND LOCATION".)
START
Tangential and Radial Height Coarse Adjustment
1
Note:
Before removing the flexible cable for the
pickup, soldering of the pickup circuit is
necessary.
For details, see "7.1.13 DISASSEMBLY".
• Pass through the guide shaft to a new 06SD Pickup Assy.
• Attach it to the Traverse Mechanism Assy-S.
• Attach the Traverse Mechanism Assy-S to the 06 LOADER Assy.
• Turn it over and attach the joint and the joint spring.
• Arrange the flexible cables.
(Refer to "7.1.13 DISASSEMBLY".)
7.5mm
Joint
Mechanism base
Guide Shaft
06SD Pickup Assy
Joint VK1B
Joint spring VK1
Hold spring
06SD Pickup Assy
Содержание XV-DV360
