Connect to network
08
29
En
F: Wireless Direct
Important
• Wireless Direct should be used only as a temporary
connection under conditions where a normal router
cannot be used. This connection is not encoded, so the
music stream and music metadata will not be encrypted.
• Wireless Direct is intended for use with smartphones in
their originally manufactured condition that receive
regular updates. If a smartphone has been modified
(such as “jailbreaking” or “unlocking” a phone), its
security is compromised, and the wireless connection
could result in unauthorized access or other intrusion.
Do not use a modified phone with Wireless Direct.
Note
• Only one wireless device can be connected at the same
time.
• Wireless Direct doesn’t have internet connection. When you
are using Wireless Direct, you will not be able to use any kind
of internet service.
• When power to this unit is turned OFF, the Wireless Direct
function is canceled, and the unit returns to the network
setting in effect prior to using the Wireless Direct function.
1
Confirm that the AC adapter and LAN cable
are not connected to the unit.
2
Connect the AC adapter, and press
STANDBY/ON.
Wait for about 30 to 40 seconds.
3
Confirm that “WAITING” is no longer
displayed on the main display. Hold the NW
SETUP depressed for 3 seconds.
The
NETWORK
indicator will light blue, and “W DIRECT” is
shown on the main display; wait for about 10 to 20 seconds.
4
When the network indicator lights blue,
connect to the network called “Wireless Direct
N : xxxxxx” from Wi-Fi network setting on the
computer, iPhone, tablet computer or other
device.
N: 0 - 9 Values
The default value is 0.
Each time the Wireless Direct is executed after this, the value
will change consecutively to 1, 2, 3, and so on.
Press and hold
NW SETUP
for 3 seconds. “W DIRECT” is
shown on the main display.
The “xxxxxx” is the device’s unique identifier number. Not all
characters may be displayed, depending on the device used.
Consult the appropriate Operating Instructions for
information regarding operation of the computer, iPhone,
tablet computer or other device used.
This completes the connection.
The
NETWORK
indicator remains lighted blue.
You may now operate your iPod/iPhone/iPad to perform
AirPlay, etc.
Network type setting
Network Type setting can be changed on the Network
Configuration screen.
1
Select Network type, Auto/Wired.
2
Press “Apply” to change settings.
Note
• Auto: Recommended value. Both wireless and wired
LAN functions will be effective. Use of wired or wireless
LAN depends on whether a LAN cable is connected at
the time the power is turned
ON
.
• Wired: Wireless LAN functions will be turned off, and
only the wired LAN is effective.
X-SMC55DAB-S_VXE8_En.book 29 ページ ２０１３年７月３０日 火曜日 午前９時４分
