Getting started
04
14
En
Chapter 4:
Getting started
To turn the power on
Press the
STANDBY/ON
to turn the power on.
About startup time:
About 30 seconds are required between after the power turns
on until the unit is actually ready to use. The time required for
startup can be reduced by setting the quick start mode to on.
After use:
Press the
STANDBY/ON
to enter the power stand-by mode.
Note
• In standby mode, if iPod/iPhone/iPad is connected, the
unit turns charge mode.
Setting the clock
1
Press
STANDBY/ON to turn the power on.
2
Press CLOCK on the remote control.
“CLOCK” is shown on the main display.
3
Press ENTER.
4
Press
/
to set the day, then press ENTER.
5
Press
/
to set the hour, then press
ENTER.
6
Press
/
to set the minute, then press
ENTER to confirm.
7
Press ENTER.
To confirm the time display:
Press the
CLOCK
. The time display will appear for about 10
seconds.
To readjust the clock:
Perform “Setting the clock” from step 1.
Note
• When power supply is restored after unit is plugged in
again or after a power failure, reset the clock.
General control
Input function
When the
INPUT
on main unit is pressed, the current function
will change to different mode. Press the
INPUT
repeatedly to
select desired function.
Network function
When pressing
NETWORK
on the remote control, the current
network function will change to different network mode.
Press the
NETWORK
repeatedly to select desired network
function. The selected function is displayed on the front panel
display.
Display brightness control
Press
DIMMER
to dims the display brightness. The
brightness can be controlled in four steps.
Volume auto setting
If you turn off and on the main unit with the volume set to 31
or higher, the volume starts at 30.
Volume control
Press the
VOLUME –/+
on the unit or press
/–
on
the remote control to increase or decrease the volume.
CAUTION
• The sound level at a given volume setting depends on
speaker efficiency, location, and various other factors. It
is advisable to avoid exposure to high volume levels. Do
not turn the volume on to full at switch on. Listen to
music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
STANDBY/ON
CD
USB
TUNER
TIMER
1
2
3
iPod
AUDIO IN
SLEEP
EQUALIZER
CLOCK
NETWORK
DISPLAY
FOLDER
MENU
PRESET
VOLUME
TUNE–
TUNE+
MEMORY
/PROGRAM
ENTER
CD
FM
IPOD
AUDIO IN
FAVORITE
USB/
IPOD
I RADIO
M SERVER
DAB
I RADIO
FAVORITE
M SERVER
X-SMC55DAB-S_VXE8_En.book 14 ページ ２０１３年７月３０日 火曜日 午前９時４分
