Using the tuner
08
22
En
Chapter 8:
Using the tuner
• This unit can not transfer FM radio from the
HDMI OUT
terminal.
Connect the FM antenna
Connect the FM antenna plug onto the center pin of the FM
antenna socket.
1
For details, see
Connecting the FM antenna
on page 7.
Listening to the FM radio broadcasts
The tuner can receive FM broadcasts, and can save your
favorite stations.
1
Press FUNCTION
/
to select FM as the
input source.
The tuned frequency will be displayed on the front panel
display (e.g., ‘
’).
2
Tune into a station.
When the tuner receives FM broadcasts, the
TUNE
indicator
lights.
There are two ways to do this:
Automatic tuning
- To search for stations, press and
hold
TUNE +/–
for about a few second. This unit will start
searching for the next station, stopping when it has
found one. Repeat to search for other stations.
Manual tuning
- To change the frequency one step at a
time, press
TUNE +/–
.
Saving stations
You can save up to 9 station presets so that you always have
easy access to your favorite stations without having to tune in
manually each time.
2
•
Manually saving station presets
1
Press FUNCTION
/
to select FM as the
input source.
The tuned frequency will be displayed on the front panel
display.
2
Tune into a station.
3
Press and hold a number button (1 to 9) for
three seconds.
The tuned frequency is preset to the selected number button.
The previous station preset is overwritten.
•
Automatically saving station presets
1
Press and hold for three seconds.
Auto tuning starts.
• The tuned frequencies will be preset to the buttons in
numerical order.
• Auto tuning stops automatically after setting up the FM
band, or after the limit of 9 presets has been reached.
Listening to station presets
1
Press FUNCTION
/
to select FM as the
input source.
The tuned frequency will be displayed on the front panel
display.
2
Press the number button (1 to 9) that stores
the FM radio station.
Tip
• Press
/–
repeatedly to selected the station
preset in numerical order.
Note
1 To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of the unit.
2 When a new broadcast frequency is stored in a station containing a previously stored frequency, the previous frequency will be overwrit-
ten with the new one.
08_tuner_SMC1.fm 22 ページ ２０１１年６月１５日 水曜日 午後５時４９分
