46
Playback with NETWORK features
10
10
Note
•
If your router does not have a built-in DHCP server function,
you have to set up the network manually.
Select DHCP to be Off and press
ENTER
in step 7.
If your
router does not have a built-in DHCP server function, you
have to set up the network manually.
Select DHCP to be
Off and press ENTER in step 4.
on page 42
•
When you connect this receiver to the Internet via a proxy
server, proxy server settings are required.
Select
Use Proxy Server
and press
ENTER
in step 7.
<Proxy Server setting>
Then Enter
Proxy Host Name
and the port number of
your proxy server in the
Proxy Port
field.
F: Connecting to a router without WPS-PBC
function
This section describes how to set the network connection
using Web browser on a computer.
Be sure your computer is equipped with wireless LAN
function. Settings can be performed from the Web browser of
the computer.
1
Be sure the LAN cable is not connected to the receiver.
2
Plug the power cord into an AC outlet. Press STANDBY/
ON.
3
Press NET SERVICE
SETUP on the remote control.
4
Select Network Setting
Network Configuration
Wireless
Web Control.
5
Select Start
OK.
The receiver restarts. Change settings on Web Control on
your computer.
6
Select Pioneer Setup (this receiver) in the available
wireless network connection of your computer.
SSID is displayed as Pioneer Setup:xxxxxx. “xxxxxx” is the
lower three bytes of the MAC address.
Note
•
Consult the appropriate operating instructions for
information regarding operation of the computer, iPhone,
tablet computer or other device used.
•
Since this kind of connection is not encoded, a minor
security risk may be involved.
•
This setting for the network has been confirmed for Mac OS
X 10.7 and Safari 5.1.
7
Start your computer's Web browser, and access the URL
noted below to make settings for this unit.
The Web Control menu will appear.
For Safari
Press Bookmark icon (
) at the upper left of the
screen. Click Bonjour list (a), and then select this unit’s
name (“Friendly Name”) (b) in Bookmark.
Note
•
The displayed name will change depending on the product
being used.
XC-HM72 *****, XC-HM82 *****, XC-HM72D ***** or XC-
HM82D ***** will be displayed. (“*****” is the lower three
bytes of the MAC address.)
8
Click Network Setup
Network Configuration. Select
Auto and then press OK.
9
Setup the network settings manually and then press
Apply.
If SSID is not displayed, return to step 9 and select
Manual
.
The receiver restarts and the new network settings are applied
to the receiver.
Note
•
You can set the network as in the above by connecting this
unit’s IP address via the Web Browser even if Web Control
isn’t selected.
000001
000002
000003
XX.XX
:xxxxxx
http://192.168.1.1
192.168.1.1
a
b
XC-HM82 *****
XC-HM82
*****
