Pioneer X-HM50-K, Руководство по эксплуатации

Страница: 21 / 76

11/2/23 X-HM50_En.fm
9
8
7
6
5
4
3
2
1
En-21
Timer and sleep operation (Remote control only)
Timer playback:
The unit turns on and plays the desired source (CD,
TUNER, USB, iPod, AUDIO IN, LINE IN) at a preset time.
This unit has 2 types of timer: ONCE TIMER and DAILY
TIMER.
Once timer:
Once timer play works for one time only at a preset time.
(“ ” indicator).
Daily timer:
Daily timer play works at the same preset time every day
that we set. For example, set the timer as a wake-up call
every morning.
(“DAILY” indicator).
Using the once timer and daily timer in combination:
For example, use the once timer to listen a radio
programme, and use the daily timer to wake up.
1
Set the daily timer (pages 21 - 22).
2
Set the once timer (pages 21 - 22).
Once timer Daily timer
Start Stop
1 minute or more
Start
Stop
n
Timer playback
Before setting timer:
l
Check that the clock is set to the correct time (refer to
page 9). If it is not set, you cannot use the timer
function.
l
For timer playback: Plug in USB or load discs or dock
iPod to be played.
1
Press the STANDBY/ON button to turn the power on.
2
Press and hold the CLOCK/TIMER button.
3
Within 10 seconds, press the or button to
select “Once” or “Daily”, and press the ENTER button.
4
Within 10 seconds, press the or button to
select “Timer Set”, and press the ENTER button.
5
To select the timer playback source (CD, TUNER, USB,
iPod, AUDIO IN, LINE IN), press the or button.
Press the ENTER button.
When you select the tuner, select a station by pressing
the or button, and then press the ENTER
button. If a station has not been programmed, “No
Preset” will be displayed and timer setting will be
cancelled.
6
To adjust the day, press the or button and then
press the ENTER button.
7
To adjust the hour, press the or button and then
press the ENTER button.
8
To adjust the minutes, press the or button and
then press the ENTER button.
9
Set the time to finish as in steps 7 and 8 above.
10
Adjust the volume using the or button, and then
press the ENTER button. Do not turn the volume up too
high.
11
Press the STANDBY/ON button to enter the power
stand-by mode. The “TIMER” indicator lights up and
the unit is ready for timer playback.
12
When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the
preset volume. The timer indicator will blink during
timer playback.
STANDBY/ON
INPUT
PHONES AUDIO IN
TIMER
VOLUME
USB
X-HM50