Connections
03
12
En
Connecting antennas
Connect the AM loop antenna and the FM wire antenna as
shown below. To improve reception and sound quality,
connect external antennas (see
Using external antenna
below).
1
Connect the AM antenna wires.
Holding the connector to connect.
2
Fix the AM loop antenna to the attached
stand.
To fix the stand to the antenna, bend in the direction indicated
by the arrow (fig. a) then clip the loop onto the stand (fig. b).
3
Place the AM antenna on a flat surface and
in a direction giving the best reception.
4
Connect the FM wire antenna into the FM
antenna socket.
For best results, extend the FM antenna fully and fix to a wall
or door frame. Don’t drape loosely or leave coiled up.
Using external antenna
To improve FM reception
Use an F connector (not supplied) to connect an external FM
antenna.
Plugging in
Before making or changing the connections, switch off the
power and disconnect the power cord from the AC outlet.
After you’ve finished making all connections, plug the unit
into an AC outlet.
CAUTION
• Do not use any power cord other than the one supplied
with this unit.
• Do not use the supplied power cord for any purpose
other than that described below.
AM
LOOP
ANTENNA
FM
UNBAL 75
Ω
2
1
3
4
fig. a
fig. b
ANTENNA
FM
UNBAL 75
Ω
F connector
VIDEO LINE
AC IN
OUT
IN
SPEAKERS
L
R
R
L
To AC outlet
This unit’s rear panel
Power cord
X-CM31_CXE_En.book 12 ページ ２０１３年４月８日 月曜日 午後１時５０分
