Pioneer VSX-832, Инструкция по эксплуатации

Страница: 61 / 563

61
En
AV Adjust
By pressing the button on the remote controller during play, you can adjust frequently
used settings, such as the sound quality, using on-screen menus. Note that there is no
display on the TV screen when the input selector is "CD", "TV", "FM", or "AM", so follow the
display on the main unit while doing the operations.
1. Press
on the remote controller to display the AV Adjust.
2. Select the item with / on the remote controller and press ENTER to confirm your
selection.
0
Change the initial values for each of the settings with the cursors  / .
0
To return to the previous screen, press .
3. To exit the settings, press .
∫ Tone
Bass : Enhance or moderate the bass range of the speaker.
Treble : Enhance or moderate the treble range of the speaker.
0
It cannot be set if the listening mode is Direct or Pure Direct.
∫
Level
Center : Adjust the speaker level of the center speaker while listening to some sound.
Subwoofer : Adjust the speaker level of the subwoofer while listening to some sound.
0
The adjustment you made will be reset to the previous status when you turn the unit to
standby mode.
∫
MCACC
MCACC EQ : Enable or disable the equalizer function that corrects for distortion caused by
the acoustic environment of the room.
0
This setting cannot be selected if Full Auto MCACC has not been performed.
0
It cannot be set if the listening mode is Pure Direct.
Manual EQ Select : Select "Preset 1" to "Preset 3" configured in "MCACC" - "Manual
> Before Start > Part Names > Install > Initial Setup > Playback
Advanced Setup | Supplementary Information | Others
1
BD/DVD AV Adjust
Tone
Level
MCACC
Other
Bass
Treble