28
USB Storage Device
Basic operations
You can play music files stored on a USB
storage device.
Perform the following procedure when the
unit is on.
1. Switch the input on the TV to that
assigned to the unit.
2. Plug your USB storage device with the
music files into the USB port either on
the front panel or rear panel of this unit.
3. Press USB (b) on the remote controller
and select "USB Front" or "USB Rear".
0
If the "USB" indicator flashes on the
display, check whether the USB
storage device is plugged in properly.
0
Do not unplug the USB storage
device while "Connecting···" is on the
display. This may cause data
corruption or malfunction.
4. Press ENTER on the remote controller in
the next screen. The list of folders and
music files on the USB storage device
are displayed. Select the folder with the
cursors and press ENTER to confirm
your selection (a).
5. With the cursors on the remote
controller, select the music file, and then
press ENTER to start playback.
0
To return to the previous screen, press
(c).
0
The USB port of this unit conforms with
the USB 2.0 standard. The transfer
speed may be insufficient for some
content you play, which may cause
some interruption in sound.
0
Note that operation is not guaranteed
with all USB storage devices.
0
This unit can use USB storage devices
that comply with the USB mass storage
device class standard. The unit is also
compatible with USB storage devices
using the FAT16 or FAT32 file system
formats.
> Install
> Playback
Advanced Setup | Supplementary Information | Others
2
1
TV
INPUT
4
3
a
c
b