Downloaded from www.vandenborre.be
Controls and displays
02
10
En
TUNER EDIT
Use with
TUNE
/
,
PRESET
/
and
ENTER
to memorize and name stations for
recall (page 43, 44).
PRESET
/
Use to select preset radio stations
(page 43).
8
MASTER VOLUME dial
9
PHONES jack
Use to connect headphones. When the
headphones are connected, there is no sound
output from the speakers (page 38).
10 Listening mode buttons
AUTO/DIRECT
Switches between Auto surround mode
(
Auto playback
on page 30) and Stream
Direct playback. Stream Direct playback
bypasses the tone controls for the most
accurate reproduction of a source
(page 33).
STEREO/ALC
Switches between stereo playback, Auto
level control stereo mode (page 32) and
Front Stage Surround Advance modes
(page 32).
STANDARD
Press for Standard decoding and to switch
between the various
2
Pro Logic II,
2
Pro
Logic IIx,
2
Pro Logic IIz and NEO:6
options (page 30).
ADV SURROUND
Switches between the various surround
modes (page 31).
11 SOUND RETRIEVER
Press to restore CD quality sound to
compressed audio sources (page 33).
12 MCACC SETUP MIC jack
Use to connect a microphone when
performing Auto MCACC setup.
Operating range of remote control
The remote control may not work properly if:
• There are obstacles between the remote
control and the receiver’s remote sensor.
• Direct sunlight or fluorescent light is
shining onto the remote sensor.
• The receiver is located near a device that is
• The receiver is operated simultaneously
with another infrared remote control unit.
30°
7 m
30°
VSX-520_SYXCN_En.book 10 ページ 2010年4月12日 月曜日 午後7時13分