Listening to your system
04
32
En
Selecting the multichannel
analog inputs
If you have connected a decoder or a BD/DVD
player with multichannel analog outputs to this
receiver (page 21), you must select the analog
multichannel inputs for surround sound.
1
•
Press MULTI IN on the remote control.
To cancel playback from the multichannel
inputs, switches to the other input signal.
Using the headphone
1
Insert the headphone into the PHONE
jack.
2
Press
then press the SPEAKERS
button to select SP OFF.
• You can also use the
SPEAKERS
button on
the front panel.
The sound is heard from the headphone and no
sound is heard from the speakers connected to
this receiver.
The listening mode when the sound is heard
from the headphone can be selected only from
STEREO
or
A.L.C.
.
Note
1 • During playback from the multichannel inputs, you can’t use any of the sound features/modes and only the volume and
channel levels can be set.
• Change the output settings of the systems with multichannel analog outputs according to the number of the speakers
connected to the receiver.
RECEIVER
VSX-420_SY_En.book 32 ページ ２０１０年３月１９日 金曜日 午前９時３７分
