The System Setup menu
08
48
En
2
Choose the X-Curve setting you want.
Use
/
to adjust the setting. The X-Curve is expressed
as a downwards slope in decibels per octave, starting at
2 kHz. The sound becomes less bright as the slope
increases (to a maximum of
-3.0dB/oct
). Use the
following guidelines to set the X-Curve according to your
room size:
• If you select
OFF
, the frequency curve will be flat and
the X-Curve has no effect.
3
Select ‘Return’ then press ENTER to finish.
THX Audio Setting
For the most effective results when using the THX Select2
Cinema and THX MusicMode listening modes (see
Using
the Home THX modes
on page 27) with the Advanced
Speaker Array (ASA) system (see
About THX
on page 74),
it is required that you make the setting. See
THX speaker
system setup
on page 19 for more on THX speaker
placement.
1
1
Select ‘THX Audio Setting’ from the Manual SP
Setup menu.
2
Specify the distance of your surround back speakers
from each other.
•
0.0 – 0.3m
– Surround speakers within 30 cm apart
(best for THX surround sound).
•
> 0.3 – 1.2m
– Surround speakers between 30 cm
and 1.2 m apart.
•
1.2m <
– Surround speakers more than 1.2 m apart.
3
When you're finished, press RETURN.
You will return to the Manual SP Setup menu.
Room size (m
2
)
≤
≤
≤
≤
36
≤
≤
≤
≤
48
≤
≤
≤
≤
60
≤
≤
≤
≤
72
≤
≤
≤
≤
300
≤
≤
≤
≤
1000
X-Curve (dB/oct)
–0.5
–1
–1.5
–2
–2.5
–3
Note
1 If you don't have surround back speakers, or just have one, you won't be able to select this setting (
Cannot select
shows in the display).
5.Manual SP Setup
:Return
a.Speaker Setting
b.Channel Level
c.Speaker Distance
d.Bass Peak Level
e.X-Curve
f.THX Audio Setting
5f.THX Audio Setting
SB SP Position
0.0-0.3m
SBL-SBR
:Finish
VSX-2016_HY.book.fm 48 ページ ２００６年２月２４日 金曜日 午後１２時４０分
