Pioneer VSX-1120-K, Руководство по эксплуатации

Страница: 83 / 108

The System Setup and Other Setup menus 11
83
En
•
HDMI Setup
– Synch r onizes this r eceive r with you r
Pionee r com p onent su pp o r ting
Control
with HDMI
( p age 52).
• Volume Setup – Sets u p the volume- r elated
o p e r ations of this r eceive r (see below).
• Remote Control Mode Setup – Sets this r eceive r ’s
r emote cont r ol mode (see below).
•
Flicker Reduction
– Adjusts the way the GUI sc r een
looks (see below).
•
EXTENSION Setup
– Allows the CU-RF100 to be used
even when the r eceive r is in the standby mode (see
below).
• Pairing Bluetooth Setup – Use to p ai r a Bluetooth
ADAPTER and Bluetooth wi r eless technology device
( p age 47).
5 Make the adjustments necessary for each setting,
pressing RETURN to confirm after each screen.
Volume Setup
You can set the maximum volume of this r eceive r o r
s p ecify what the volume level will be when the p owe r is
tu r ned on.
1 Select ‘Volume Setup’ from the Other Setup menu.
2 Select the Power ON Level setting you want.
The volume can be set so that it is always set to the same
level when the
r eceive r ’s p owe r is tu r ned on.
•
LAST
(default) – When the p owe r is tu r ned on, the
volume is set to the same level as when the p owe r
was last tu r ned off.
• “ --- ” – When the p owe r is tu r ned on, the volume is set
to minimum level.
• –80.0dB to +12.0dB – S p ecify the volume to be set
when the p owe r is tu r ned on, in ste p s of 0.5 dB.
It is not p ossible to set a volume level g r eate r than the
value s p ecified at Volume Limit setu p (see below).
3 Select the Volume Limit setting you want.
Use this function to limit the maximum volume. The
volume cannot be inc
r eased above the level set he r e,
even by o p e r ating MASTER VOLUME button (o r the dial
on the f r ont p anel).
• OFF (default) – The maximum volume is not limited.
•
–20.0dB
/
–10.0dB
/
0.0dB
– The maximum volume is
limited to the value set he r e.
4 Select the Mute Level setting you want.
This sets how much the volume is to be tu r ned down
when MUTE is pr essed.
• FULL (default) – No sound.
•
–40.0dB
/
–20.0dB
– The volume will be tu r ned down
to the level s p ecified he r e.
5 When you’re finished, press RETURN.
You will r etu r n to the
Other Setup
menu.
Remote Control Mode Setup
• Default setting:
1
This sets this r eceive r ’s r emote cont r ol mode to pr event
e rr oneous o p e r ation when multi p le units of the r eceive r
a r e being used.
1 Select ‘Remote Control Mode Setup’ from the
Other Setup menu.
2 Select the Remote Control Mode setting you want.
3 Select “OK” to change the remote control mode.
4 Follow the instructions on the screen to change the
remote control’s setting.
See Operating multiple receivers on p age 62.
5 When you’re finished, press RETURN.
You will r etu r n to the
Other Setup
menu.
Flicker Reduction Setup
• Default setting:
OFF
The GUI sc r een’s r esolution can be inc r eased. If you feel
the GUI sc r een is ha r d to see, t r y changing this setting.
Note that the r esolution in this setting only affects the
GUI sc r een; it has no influence on the video out p ut.
1 Select ‘Flicker Reduction Setup’ from the Other
Setup menu.
2 Select the Flicker Reduction setting you want.
3 When you’re finished, press RETURN.
You will r etu r n to the Other Setup menu.
EXTENSION Setup
• Default setting: OFF
A se p a r ately sold the CU-RF100 can be used to o p e r ate
the r eceive r by RF communications. To do so, set the
EXTENSION
setting to
ON
. When
ON
is set he r e, the
r eceive r can be o p e r ated even when the r eceive r is in the
standby mode.
1 Select ‘EXTENSION Setup’ from the Other Setup
menu.
2 Select the EXTENSION setting you want.
3 When you’re finished, press RETURN.
You will r etu r n to the Other Setup menu.
VSX-1120_UXJCB.book 83 ページ ２０１０年３月１０日 水曜日 午後２時２分