Pioneer VSX-1120-K, Руководство по эксплуатации

Страница: 81 / 108

The System Setup and Other Setup menus 11
81
En
X-Curve
Most soundt r acks mixed fo r cinema sound too b r ight
when p layed back in la r ge r ooms. The X-Cu r ve setting acts
as a kind of r e-equalization fo r home theate r listening, and
r esto r es pr o p e r tonal balance of movie soundt r acks.
1
1 Select ‘X-Curve’ from the Manual SP Setup menu.
2 Choose the X-Curve setting you want.
Use
/
to adjust the setting. The X-Cu r ve is ex pr essed
as a downwa r ds slo p e in decibels p e r octave, sta r ting at
2 kHz. The sound becomes less b r ight as the slo p e
inc r eases (to a maximum of –3.0dB/oct ). Use the
following guidelines to set the X-Cu r ve acco r ding to you r
r oom size:
• If you select
OFF
, the f r equency cu r ve will be flat and
the X-Cu r ve has no effect.
3 When you’re finished, press RETURN.
THX Audio Setting
This menu allows the use r to adjust va r ious THX featu r es
including Loudness Plus, SBch pr ocessing, SB S p eake r
Position, THX Select2 Subwoofe r (on/off), and Bounda r y
Gain Cont r ol. Please see p age 95 fo r details r ega r ding
these THX featu r es.
1 Select ‘THX Audio Setting’ from the Manual SP
setup menu.
2 Select either ON or OFF for the THX Loudness Plus
setting.
3 Specify whether the SBch processing is AUTO or
MANUAL.
•
AUTO
– When su rr ound back s p eake r s a r e connected,
whethe r o r not su rr ound back channel signals a r e
pr esent in the audio signals being in p ut is detected
and the a ppr o pr iate THX su rr ound mode is set.
• MANUAL – The desi r ed THX su rr ound mode can be
selected r ega r dless of whethe r o r not su rr ound back
channel signals a r e pr esent in the audio signals
being in p ut.
4 Specify the distance of your surround back speakers
from each other.
• 0–1 ft – Su rr ound back s p eake r s within 1 foot a p a r t.
•
>1–4 ft
– Su rr ound back s p eake r s between 1 and 4
feet a p a r t.
• 4 ft< – Su rr ound back s p eake r s mo r e than 4 feet
a p a r t (default).
5 Specify whether your subwoofer is THX Select2
certified or not.
If you r subwoofe r isn’t THX Select2 ce r tified, but you still
want to switch bounda r y gain com p ensation on, select
YES
he r e, but the effect might not wo r k pr o p e r ly.
6 Select either ON or OFF for Boundary Gain
Compensation setting.
7 When you’re finished, press RETURN.
You will r etu r n to the Manual SP Setup menu.
Network Setup menu
Setting u p the netwo r k to listen to Inte r net r adio on this
r eceive r .
1 Press on the remote control, then press
HOME MENU.
A G r a p hical Use r Inte r face (GUI) sc r een a pp ea r s on you r
TV. Use
///
and
ENTER
to navigate th r ough the
sc r eens and select menu items. P r ess
RETURN
to
confi r m and exit the cu rr ent menu.
2 Select ‘System Setup’ from the Home Menu.
3 Select ‘Network Setup’ from the System Setup
menu.
4 Select the setting you want to adjust.
If you a r e doing this fo r the fi r st time, you may want to
adjust these settings in o r de r :
• IP Address, Proxy – Sets u p the IP add r ess/P r oxy of
this r eceive r (see below).
•
Information
– Checks the MAC add r ess of this
r eceive r ( p age 82).
• Network Standby – Allows the Web Cont r ol
function to be used even when the r eceive r is in the
standby mode ( p age 82).
IP address/Proxy setting
In case the r oute r connected to the LAN te r minal on this
r eceive r is a b r oadband r oute r (with a built-in DHCP
se r ve r function), sim p ly tu r n on the DHCP se r ve r
function, and you will not need to set u p the netwo r k
manually. You must set u p the netwo r k as desc r ibed
below only when you have connected this r eceive r to a
b r oadband r oute r without a DHCP se r ve r function.
Befo r e you set u p the netwo r k, consult with you r ISP o r
the netwo r k manage r fo r the r equi r ed settings. It is
advised that you also r efe r to the o p e r ation manual
su pp lied with you r netwo r k com p onent.
2
Note
1 Since the pr inci p al is the same, X-Cu r ve isn’t a pp lied when you’ r e using any of the Home THX o r Pu r e di r ect modes.
Room size (ft
2
)
≤
400
≤
550
≤
650
≤
800
≤
2200
≤
12000
X-Curve (dB/oct) –0.5 –1.0 –1.5 –2.0 –2.5 –3.0
2 In case you make changes to the netwo r k configu r ation without the DHCP se r ve r function, make the co rr es p onding changes to the netwo r k
settings of this r eceive r .
RECEIVER
VSX-1120_UXJCB.book 81 ページ ２０１０年３月１０日 水曜日 午後２時２分