background image

Additional information

11

11

66

4

62

7

Resetting the main unit

Use this procedure to reset all the receiver’s settings to the 

factory default. Use the front panel controls to do this.

For instructions on resetting the network connection 

settings, see 

Factory Reset

 on page 45

.

1

Switch the receiver into standby.

2

While holding down 

BAND

, press and hold 

STANDBY/ON

 for about two seconds.

3

When you see RESET? appear in the display, press 

AUTO SURROUND/STREAM DIRECT

.

OK?

 shows in the display.

4

Press 

ALC/STANDARD SURR

 to confirm.

OK

 appears in the display to indicate that the receiver 

has been reset to the factory default settings.

Important

If the 

Control

 with HDMI function is set to 

ON

, the HDMI 

function’s Standby Through is set to anything other than 

OFF

, or the Network Standby is set to 

ON

, you may not be 

able to reset the unit. In this case, reset either by turning 

OFF

 the 

Control

 with HDMI function, or by putting the unit 

into standby mode by turning off the power of all the 

connected devices, and resetting after the HDMI indicator 

on the front panel turns off.

Cleaning the unit

Use a polishing cloth or dry cloth to wipe off dust and dirt.

When the surface is dirty, wipe with a soft cloth dipped in 

some neutral cleanser diluted five or six times with water, 

and wrung out well, and then wipe again with a dry cloth. 

Do not use furniture wax or cleansers.

Never use thinners, benzine, insecticide sprays or other 

chemicals on or near this unit, since these will corrode the 

surface.

Manufactured under license from Dolby Laboratories. “Dolby”, 
“Pro Logic”, “Surround EX”, and the double-D symbol are 
trademarks of Dolby Laboratories.

Manufactured under license from Dolby Laboratories. Dolby, 
Pro Logic, and the double-D symbol are trademarks of Dolby 
Laboratories.

VSX-823

VSX-1023

Manufactured under license under U.S. Patent Nos: 5,956,674; 
5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 
7,392,195; 7,272,567 & other U.S. and worldwide patents 
issued & pending. DTS-HD, the Symbol, & DTS-HD and the 
Symbol together are registered trademarks & DTS-HD Master 
Audio is a trademark of DTS, Inc. Product includes software. 
© DTS, Inc. All Rights Reserved.

Manufactured under license under U.S. Patent Nos: 5,956,674; 
5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 
7,392,195; 7,272,567 & other U.S. and worldwide patents 
issued & pending. DTS-HD, the Symbol, & DTS-HD and the 
Symbol together are registered trademarks of DTS, Inc. Product 
includes software. © DTS, Inc. All Rights Reserved. 

VSX-1023

VSX-823

VSX-1023_823_UCSMXCN_En.book  66 ページ  2012年12月18日 火曜日 午前11時7分

Содержание VSX-1023-K





































































Отзывы: