Pioneer VREC-DZ600, Руководство пользователя

Страница: 25 / 39

− 25 −
English
Video Recording
Recording automatically starts when this product is started. The recorded video is saved to the
microSD card as one file of the set increment of time (default: 3 minutes), and when the microSD card
runs out of free space, the files are overwritten starting from the oldest file.
Notes
• You can change the video recording time.
→
“This Product Settings” - “Configurable Features” - “Video Recording” - “Video Clip
Length”
• Video recording will stop under the following circumstances.
— When the MENU screen is displayed
— When the power supply is stopped
— When parking mode has started
• The recording time may differ depending on the conditions.
Event Recording
Automatic Recording by Detecting Impacts (Event Recording)
The continuous video file when an impact was detected by this product, such as an impact with another
vehicle, is automatically saved for the 30 seconds before and 30 seconds after the moment of detection
as an event video file.
30 seconds before, 30 seconds after
Start of recording
Video recording file 1 Video recording file 2 Video recording file 3
Event video file
Impact detected
* The video recording file is saved to the “Video” folder.
* The event video file is saved to the “Event” folder.
Manual Recording (Manual Event Recording)
The manual recording file when the function button is pressed during video recording is saved
for the 30 seconds before and 30 seconds after the moment the button is pressed as an event video file.
Notes
• You can adjust the sensitivity for detecting impacts.
→
“This Product Settings” - “Configurable Features” - “Video Recording” - “G-Sensor
Sensitivity”
• When impact was detected or manual recording was performed in the event recording mode, event
recording is started again after event recording ends.
• The recording time may differ depending on the conditions.