Pioneer SGX-CA600 Скачать руководство пользователя страница 22

Страница: 22 / 335

For safety reasons, the device will not charge in an environment outside

the charging temperature range (0°C to 45°C).

If the internal temperature of the device is too high, charging may not be

possible even when the ambient temperature is within range.

In this case, turn off the device, allow time to cool down and recharge.

Connect the provided USB cable directly to a USB port of your PC.

If the device is connected via a USB hub, charging may not be possible

due to insufficient capacity.

Make sure that the USB output of your PC is compatible with 5 V/500 mA.

Do not unplug the USB cable, shut down the PC or put it to sleep, sus-

pend the power supply to the USB, etc. during access between the

device and PC as there is a risk of corrupting data in the device.

Unplug the USB cable from the USB port.

Once data transfer or charging is complete, disconnect the USB cable

from the PC first, and then from the device.

Close the USB connector cover.

Securely close the USB connector cover.

If the cover is not securely closed, waterproof performance may be

impaired.

■

Checking the battery level

You can check the battery level from the battery level icon displayed on the status

bar of the main menu screen.

Содержание SGX-CA600
















































































































































































































































































































































Результаты поиска

Содержание SGX-CA600

Отзывы:

Бренды по названию

Популярные бренды

Pioneer SGX-CA600, Руководство пользователя

Результаты поиска

Содержание SGX-CA600

Отзывы:

Бренды по названию

Популярные бренды