49
> Settings
|
Control Function Settings
You can enable the control functions between the unit and
external devices. Special devices or cable connections are
necessary to enable the functions. For more information
about installation, contact a store specializing in these
products.
■
RS-232C port
Use this port for connection with an integrated control
system that can enable home automation. Some integrated
control systems provide a centralized operation with a
single touch panel controller in order to control audio and
video home appliances and security devices together. For
more information about adopting an integrated control
system, contact the specialized stores.
■
IR jack
If you use a commercially available multiroom remote
control kit with this jack, you can operate the unit with
the remote controller even when you are in a separate
room, or operate the unit with the remote controller even
if its remote control sensor is difficult to see. You can also
connect a device with the unit and operate it with the
remote controller.
Signal flow
Zone
Main room
Remote
controller
Connecting
block
This unit
IR receiver
Other companies may use indications other than IR on
their products. Confirm in the instruction manual included
with your components.
•
Refer to the instruction manual of the IR receiver for the
types of cables required for connection.
■
12V trigger output jack
You can enable power link operation when you connect
the unit and an external device such as power amplifier
equipped with 12V trigger input jack. When the desired
input is selected on the unit or when an HDMI OUT
jack that outputs video is switched, external unit power
link operation will be activated with a control signal of
maximum 12 V/100 mA from the 12V TRIGGER OUT
A jack or maximum 12 V/25 mA when using the 12V
TRIGGER OUT B jack. You can select the zone to output
the control signal by setting each of the inputs. For
connection, use a monaural mini plug cable.
Содержание SC-LX901
Страница 35: ...35 ...
