Pioneer SC-LX901, Основное руководство

Страница: 58 / 117

22
> Specifications > Settings > Listening Modes > Playback Function > Basic Manual
Troubleshooting | Appendix
Setting Item Default Value Setting Details
Network Standby On When this feature is turned "On", you can turn
on the power of the unit via the network using an
application such as iControlAV5 that can control
this unit.
• When "Network Standby" is used, the power
consumption increases even when the unit
is on standby. However, the increase in
power consumption is kept to a minimum by
automatically entering the HYBRID STANDBY
mode, where only the essential circuit is
operating.
• "Network Standby", which suppresses power
consumption, may be disabled when the
network connection is lost. Use the power
button on the remote controller or main unit to
turn the unit on if this happens.
Bluetooth Wakeup Off
This function wakes up the unit on standby by
connecting a BLUETOOTH enabled device.
"On": Use this function
"Off": Do not use this function
•
Setting to "On" increases the power
consumption even when the unit is on standby.
However, the increase in power consumption
is kept to a minimum by automatically entering
the HYBRID STANDBY mode, where only the
essential circuit is operating.
•
This setting is fixed to "Off" if "Network/
Bluetooth" - "Bluetooth" - "Auto Input Change"
is set to "Off".
• Wait for a while if "Network Standby" and "Bluetooth Wakeup" cannot be selected. It will appear
when the network feature is started.
■ 12V Trigger A
Set when outputting the control signal (maximum 12 V/100 mA) through the 12V TRIGGER
OUT A jack. Different settings can be set for each input selector. You can enable power link
operation when you connect the unit and the external devices equipped with 12V trigger
input jack.
Setting Item Default Value Setting Details
HDMI Out Off Set when you want to output a 12V trigger in
response to switching of an HDMI OUT jack that
outputs video.
"Off": No output
"MAIN": Output when switched to the HDMI OUT
MAIN jack.
"SUB": Output when switched to the HDMI OUT
SUB jack.
• This can be selected only when "System Setup"
- "Input/Output Assign" - "TV Out/OSD" - "Zone
2 HDMI" is set to "Not Use".
"ZONE 2": Output when switched to the HDMI OUT
ZONE 2 jack.
• This can be selected only when "System Setup"
- "Input/Output Assign" - "TV Out/OSD" - "Zone
2 HDMI" is set to "Use".
BD/DVD Off Set the 12V trigger output setting to each input.
• To use this function, set "HDMI Out" to "Off" in
advance.
"Off": No output
"Main": Output when "BD/DVD" is selected as input
source for the main room.
"Zone2": Output when "BD/DVD" is selected as
input source for ZONE2.
"Zone3": Output when "BD/DVD" is selected as
input source for ZONE3.