71
08
Control with HDMI function
About the Control with HDMI function
Synchronized operations below with a
Control
with HDMI-compatible Pioneer TV or Blu-ray Disc player are pos-
sible when the component is connected to the receiver using an HDMI cable.
!
The receiver’s volume can be set and the sound can be muted using the TV’s remote control.
!
The receiver’s input switches over automatically when the TV’s input is changed or a
Control
with HDMI-
compatible component is played.
!
The receiver’s power is also set to standby, when the TV’s power is set to standby.
Important
!
With Pioneer devices, the
Control
with HDMI functions are referred to as “KURO LINK”.
!
You cannot use this function with components that do not support
Control
with HDMI.
!
We only guarantee this receiver will work with Pioneer
Control
with HDMI-compatible components. However,
we do not guarantee that all synchronized operations will work with components that support the
Control
with
HDMI function.
!
Use a High Speed HDMI
®
/
TM
cable when you want to use the
Control
with HDMI function. The
Control
with
HDMI function may not work properly if a different type of HDMI cable is used.
!
For details about concrete operations, settings, etc., refer to also the operating instructions for each
component.
Making Control with HDMI connections
You can use synchronized operation for a connected TV and other components.
!
Be sure to connect the TV’s audio cable to the audio input of this unit. When the TV and receiver are connected
by HDMI connections, if the TV supports the HDMI ARC (Audio Return Channel) function, the sound of the
TV is input to the receiver via the
HDMI OUT 1
terminal, so there is no need to connect an audio cable. In this
case, set
ARC
at
HDMI Setup
to
ON
(see
HDMI Setup
on
page 71
).
For details, see
Connecting your TV and playback components
on
page 30
.
Important
!
When connecting this system or changing connections, be sure to switch the power off and disconnect the
power cord from the wall socket. After completing all connections, connect the power cords to the wall socket.
!
After this receiver is connected to an AC outlet, a 2 second to 10 second HDMI initialization process begins.
You cannot carry out any operations during this process. The
HDMI
indicator in the front panel display blinks
during this process, and you can turn on this receiver once it has stopped blinking. When you set the
Control
with HDMI to
OFF
, you can skip this process. For details about the
Control
with HDMI feature, see
Control with
HDMI function
on
page 70
.
!
To get the most out of this function, we recommend that you connect your HDMI component not to a TV but
rather directly to the HDMI terminal on this receiver.
!
The
Control
with HDMI function works on the TV connected to the
HDMI OUT 1
terminal. It does not work on
TVs connected to the
HDMI OUT 2
or
HDMI OUT 3
terminals.
HDMI Setup
You must adjust the settings of this receiver as well as the connected
Control
with HDMI-compatible compo-
nents in order to make use of the
Control
with HDMI function. For more information see the operating instruc-
tions for each component.
1 Press
on the remote control, then press HOME MENU.
2 Select ‘System Setup’, then press ENTER.
3 Select ‘HDMI Setup’, then press ENTER.
4 Select the ‘Control’ setting you want.
Choose whether to set this unit’s
Control
with HDMI function
ON
or
OFF
. You will need to set it to
ON
to use the
Control
with HDMI function.
When using a component that does not support the
Control
with HDMI function, set this to
OFF
.
!
ON
– Enables the
Control
with HDMI function. Set
Control Mode
,
ARC
and
PQLS
in the subsequent setting
items to the desired values.
Also, by setting this to
ON
, the Sound Retriever Link and Stream Smoother Link functions can be operated
automatically by connecting a player supporting the respective functions. See
Setting the Audio options
on
page 75
for details on Sound Retriever Link,
Setting the Video options
on
page 77
for details on Stream
Smoother Link.
!
OFF
– The
Control
with HDMI is disabled. The
Control Mode
,
ARC
and
PQLS
functions in the subsequent
setting items cannot be used.
5 Select the ‘Control Mode’ setting you want.
Choose whether you want to enable synchronized operations.
!
ON
– Enabled for the synchronized operations.
!
OFF
– The synchronized operations disabled.
6 Select the ‘ARC’ setting you want.
When a TV supporting the HDMI ARC (Audio Return Channel) function is connected to the receiver, the sound of
the TV can be input via the
HDMI OUT 1
terminal.
After setting the
ARC
, some time may be required for the connected device to be recognized and the sound to be
produced.
!
ON
– The TV’s sound is input via the HDMI terminal.
!
OFF
– The TV’s sound is input from the Audio input terminals other than HDMI inputs.
7 Select the ‘PQLS’ setting you want.
Choose whether to set this unit’s
PQLS
function
AUTO
or
OFF
.
For details about PQLS function, see
Setting the PQLS function
on
page 72
.
!
AUTO
– PQLS is enabled. A precision quartz controller in this receiver eliminates distortion caused by timing
errors (jitter), giving you the best possible digital-to-analog conversion when you use the HDMI interface. This
is valid as an HDMI function for PQLS-compatible players.
!
OFF
– PQLS is disabled.
8 Select the ‘Standby Through’ setting you want.
It is possible to transfer signals from an HDMI-connected player to the TV when this receiver’s power is on
standby.
Select the HDMI input whose HDMI signal is to be input for through transfer when in the standby mode. When
LAST
is selected, the signal being input to the currently selected HDMI input is transferred. When
OFF
is
selected, no HDMI input is transferred through when in the standby mode. (However, when
Control
is set to
ON
,
the HDMI signal is transferred through by the
Control
with HDMI function even when in the standby mode.)
!
When anything other than
OFF
is set for this setting, the receiver’s HDMI input can be switched even when
the receiver is in the standby mode. (Switch by pointing the remote control at the receiver and pressing the
HDMI
,
BD
,
DVD
,
SAT/CBL
or
DVR/BDR
button.)
!
Setting to anything other than
OFF
increases power consumption in the standby mode.
!
This setting can be used even with devices that are not compatible with the
Control
with HDMI function.
!
The Standby Through function cannot be used with MHL-compatible devices.
9 Select the ‘12V Trigger’ setting you want.
The component connected to the
12 V TRIGGER
jack can be turned on and off when
HDMI OUT
is switched.
OUT 1
,
OUT 2
,
OUT 3
or
OFF
can be selected. Select
OFF
when you want the component to switch when the
input function is switched.
