Pioneer SC-LX73, Руководство по эксплуатации

Страница: 119 / 144

Additional information 13
119
En
Other audio problems
No sound f r om f r ont height o r
f r ont wide speake r s.
• Check that the f r ont height o r f r ont wide speake r s a r e set to LARGE o r SMALL , and the su rr ound
speake r s a r e not set to NO (see
Speaker Setting
on page 110).
• Check the speake r connections (see
Connecting the speakers
on page 23).
No sound f r om subwoofe r . • Check that the subwoofe r is connected p r ope r ly, switched on and the volume tu r ned up.
• If you r subwoofe r has a sleep function, make su r e it is switched off.
• Make su r e that the Subwoofe r setting is YES o r PLUS (see
Speaker Setting
on page 110).
• The c r ossove r f r equency may be set too low; t r y setting it highe r to match the cha r acte r istics of
you r othe r speake r s (see Speaker Setting on page 110).
• If the r e is ve r y little low f r equency info r mation in the sou r ce mate r ial, change you r speake r settings
to F r ont:
SMALL
/ Subwoofe r :
YES
, o r F r ont:
LARGE
/ Subwoofe r :
PLUS
(see
Speaker Setting
on
page 110).
• Check that the LFE channel is not set to
OFF , o r to a ve r y quiet setting (see
Setting the Audio options
on page 71).
• Check the speake
r level settings (see Channel Level on page 111).
No sound f r om one speake r . • Check the speake r connection (see
Connecting the speakers
on page 23).
• Check the speake r level settings (see Channel Level on page 111).
• Check that the speake r hasn’t been set to
NO
(see
Speaker Setting
on page 110).
• The channel may not be r eco r ded in the sou r ce. By using one of the advanced effect listening
modes, you may be able to c r eate the missing channel (see Listening in surround sound on page 55).
Sound is p r oduced f r om
analog components, but not
f
r om digital ones (DVD, LD,
CD-ROM, etc.).
• Check that the input signal type is set to DIGITAL (see Choosing the input signal on page 58).
• Make su r e that the digital input is assigned co rr ectly fo r the input jack the component is connected
to (see
The Input Setup menu
on page 45).
• Check the digital output settings on the sou r ce component.
• If the sou r ce component has a digital volume cont r ol, make su r e this is not tu r ned down.
• Make su r e that the multichannel analog inputs a r e not selected. Select any othe r input function.
No sound is output o r a noise is
output when Dolby Digital/DTS
softwa
r e is played back.
• Check that you r BD o r DVD playe r is compatible with Dolby Digital/DTS discs.
• Check the digital output settings o r the HDMI audio output settings of you r BD o r DVD playe r .
Make su r e that the DTS signal output is set to On.
• If the sou r ce component has a digital volume cont r ol, make su r e this is not tu r ned down.
No sound when using the
Home Menu
.
• If the HDMI input function is selected, sound is muted until exiting the Home Menu .
Symptom Remedy
B r oadcast stations cannot be
selected automatically, o r
the r e is conside r able noise in
r adio b r oadcasts.
For FM broadcasts
• Fully extend the FM wi r e antenna, adjust the position fo r best r eception and secu r e to a wall, etc.
• Use an outdoo r antenna fo r bette r r eception (see page 36).
For AM broadcasts
• Adjust the position and di r ection of the AM antenna.
• Use an outdoo r antenna fo r bette r r eception (see page 36).
• Noise may be caused by inte r fe r ence f r om othe r equipment, such as a fluo r escent light, moto r ,
etc. Switch off o r move the othe r equipment, o r move the AM antenna.
Noise is output when scanning
a DTS CD. • This is not a malfunction of the r eceive r . The scan function of you r playe r alte r s the digital
info r mation, making it un r eadable, r esulting in noise being output. Lowe r the volume when
scanning.
When playing a DTS fo r mat LD
the r e is audible noise on the
soundt r ack.
• Make su r e that the input signal type is set to
DIGITAL
(see
Choosing the input signal
on page 58).
Can’t r eco r d audio. • You can only make a digital r eco r ding f r om a digital sou r ce, and an analog r eco r ding f r om an
analog sou r ce.
• Fo r digital sou r ces, make su r e that what you’ r e r eco r ding isn’t copy p r otected.
• Check that the OUT jacks a r e p r ope r ly connected to the r eco r de r s input jacks (see Connecting the
multichannel analog inputs on page 33).
Subwoofe r output is ve r y low. • To r oute mo r e signal to the subwoofe r , set it to PLUS o r set the f r ont speake r s to SMALL (see
Speaker Setting on page 110).
Symptom Remedy
SC-LX83_73_DLPW.book 119 ページ ２０１０年５月１９日 水曜日 午後２時７分